Table of Contents
Advertisement
OPERATION
STOPPING IN EMERGENCY
If there should be a failure in the foot brake, stop the machine as
follows.
When the machine stops, put blocks under the tires immediately.
Immediately after making an emergency stop, the parking brake disc
will be at high temperature, so wait for it to cool before carrying out
repair or adjustment. Ask Komatsu distributor for repair and
adjustment.
1. Pull retarder control lever (1) fully to apply the retarder.
2. If operating retarder control lever (1) does not give enough
braking force, set parking brake switch (2) to PARKING to
apply the parking brake.
3. If an emergency stop has been made, put blocks under the tires immediately, then try to find the cause, and
repair it on site.
If the parking brake has been used to make an emergency stop, it is necessary to re-adjust the parking brake.
Contact your Komatsu distributor for adjustment.
WARNING
https://www.besttruckmanuals.com/
OPERATION
3 - 93
Advertisement
Chapters
Table of Contents
