Sony SCPH-90006 User Manual page 38

Connecting the console
Warning
Do not plug the AC power cord for the console into the electrical outlet until you
have made all other connections.
1
Connect the Ethernet cable to the network connector on the
console rear.
Commercially available Ethernet cable
2
Insert the connector on the Ethernet cable to the network
device.
The connection method will vary depending on the network device.
Refer to the instructions supplied with the network device for details.
38
Connecting to a network
Console rear
Warning
Do not connect Ethernet cables or telephone cords of the following types to the
network connector; too much electrical current may pass through the connector,
causing a malfunction, excessive heat or fire in the connector:
- Ethernet cables not appropriate for use with a 10Base-T/100Base-TX network
- Standard residential telephone lines
- Any ISDN (digital) compatible phone or data line
- PBX phone lines
- Other "unknown" types of telephone lines