Preparation; Getting Started - Sony SCPH-90006 User Manual

Preparation

Getting started

Removing the 3-pin converting adaptor (SCPH-
90006 only)
Electrical outlet configuration may vary depending on the region of use. If
the plug on the supplied AC power cord does not match the electrical
outlet, loosen the screw and remove the converting adaptor.
3-pin converting adaptor
Positioning the console
You can place the console in either the horizontal or vertical position.
Horizontal position
Set the console horizontally.
Mains power plug
MEMORY CARD MEMORY CARD
Vertical position
When setting the console in the vertical
position, use the SCPH-90110 vertical stand
(for PlayStation 2) (sold separately).
®
Hint
Some vertical stands (for PlayStation
®
PlayStation 2 console. For details, see the Quick Reference (
®
the SCPH-90110 when purchasing a vertical stand.
Caution
Do not place the console in locations where it may be exposed to the following
conditions:
• Places subject to excessive cigarette smoke or dust. Cigarette smoke residue
or dust build-up on the internal components, such as the lens, may cause the
console to malfunction.
• Places subject to extreme temperatures, in direct sunlight, near a heat source,
or in a car with its windows closed (particularly in summer). These conditions
may warp the exterior of the console or cause the console to malfunction.
• Places close to magnetic fields, such as those produced by magnets or
loudspeakers.
• Places subject to vibration.
2) cannot be used with this model of the
page 2). Choose
Getting started
EN
3