Table of Contents
Advertisement
EXCELL PRECISION CO., LTD.
Press
key
TARE
ON|ZERO
Use
or
UNITS
to enter a parameter
Press
key to
TARE
complete function setting
Weighing mode
= Hold function disabled
= "Peak hold" mode
= "Stable hold 1" mode
= "Stable hold 2" mode
02025100
Last Page
Hold function setting
The display shows the current setting
Hold function setting
1
Use
0 Hold function disabled
1 "Peak hold" mode
2 "Stable hold 1" mode
3 "Stable hold 2" mode
ON|ZERO key Upward key (from 0 to 9)
UNITS
TARE key Confirm / enter key
NET|GROSS key Move the cursor to left.
The scale shows the maximum weight value detected from
the continuously changing weight values. Press any key to
exit the hold function.
After the scale is stable, the display shows the current weight
value. Press any key to exit the hold function.
After the scale is stable, the display shows the current weight
value. Re-zero the scale to exit the hold function.
ON|ZERO
or
UNITS
1
key Downward key (from 9 to 0)
1
9
key to enter a parameter
ZSME300000340
Advertisement
Table of Contents
