Yamaha DSP-A2070 Operation Manual page 27

OTHER IMPORTANT SETTINGS AND ADJUSTMENTS
The following seven types of settings and adjustments should be
done before enjoying audio and video sources. Note that these
settings and adjustments cannot be done without monitoring the
display information (or the information displayed on the monitor
screen).
1. CENTER MODE
2. CENTER GEQ
3. LOW FREQ. TEST
4. PARAMETER INIT
5. MEMORY GUARD
6. VCR3 VIDEO OUT
7. INPUT LVL TRIM
SETTING/ADJUSTMENT PROCEDURE
As described on page 9, you can perform these settings and
adjustments watching the information displayed on the monitor
screen (or superimposed over the video image). So, to use this
function, first turn the monitor on.
1. Set the PARAMETER/SET MENU switch to the SET/MENU
position on the remote control unit.
Remote control
PARAMETER
SET MENU
2. Select an item (title) of setting/adjustment.
THEATER
CENTER
LEVEL
ON SCREEN
REAR
LEVEL EFFECT
ON/OFF
RESET CLEAR
3. Select any desired mode or edit parameters on the item.
THEATER
CENTER
LEVEL
ON SCREEN
REAR
LEVEL
EFFECT
ON/OFF
RESET CLEAR
In the same way, perform settings/adjustments for other items.
NOTE: Setting conditions will be confirmed by using the INPUT
TRIM control and the SET MENU switch on the front panel. Items
No. 1 – 7 (except No. 4) are called by pressing the SET MENU
switch and the settings can be changed by the INPUT TRIM control.
It is recommended to use the remote control for this operation.
TV MOVIE MOVIE
THEATER 1 THEATER 2 PRO LOGIC
9 10 11 12
PARAMETER
SET MENU
MASTER
VOLUME
MUTING
MOVIE MOVIE
TV
THEATER 1 THEATER 2 PRO LOGIC
9 10 11 12
PARAMETER
SET MENU
MASTER
VOLUME
MUTING
25