Table of Contents
Advertisement
6. DCP (Detachable Control Panel)
Source Unit Front
/
/
/ / '
/
OCP
connector
DCP Rear Panel
Note:
ct
If the OCP is dirty, wipe off with a soft, dry cloth only
OCP
OCP case
Storing the DCP in the DCP Case
Hold the DCP, in the orientation as shown in the
figure below, and put it into the supplied DCP
case. (Ensure the DCP is in the correct orienta-
tion.)
• The DCP can easily be damaged by shocks. After
removing it, place it in a protective case and be
careful not to drop it or subject it to strong shocks.
• When the release button is pressed and the DCP is
unlocked, the car's vibrations may cause it to fall.
To prevent damage to the DCP, always store it in a
protective case after detaching it.
• The rear connector that connects the source unit
and the DCP is an extremely important part. Be
careful not to damage it by pressing on it with fin-
gernails, pens, screwdrivers, etc.
Attaching the DCP
1. Insert the right side of the DCP into the main
unit.
2. Insert the left side of the DCP into the main
unit.
The OCP is unlocked
3. Remove the DCP.
Removing the DCP
1. Press the [FNC] button for 1 second or longer
to switch off the power.
2. Press in the [RELEASE] button.
~
[RELEASE] button
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the car.
08335/08235
7
Advertisement
Table of Contents
