Installing The Transceiver - Azden PCS-9600D Owner's Manual

INSTALLING THE TRANSCEIVER
The rear panel of the transceiver is provided with 1) the power
SbirSith connector, 2) antenna connector(50 ohm impedance) and 3)
3.5mm external speaker jack.
1
no not operate the unit without the antenna connected. Be sure
?ha? ^he St is turned off before connecting power, antenna and
microphone.
SrpSrttvlt.) te^inal of the -
battery. The black lead is for the negative(-) termina .
For mobile installations, note that the was designed to work
with automobiles having a negative ground the
rSative ground system means that the negative terminal of the
automobile battery is gromded to the automobile fram .
modern automobiles are built this way.
If vour automobile has a positive ground system it
frame.
+ 1^.9 VDc',
will result in improper operation and may possibly
damage the unit.
4. use an antenna cable having a j"Pf feL!?"^'
aura to •«ach the cable ccnnector J^'°,"thrSpn ..y
TaSSrSe °cSn^rct""c icoaen^f it ia net properly tightenea.
5. When mounting the unit in your ®htoraobile, position ® ^
irSonel^Lr-aeo^r Sn until the
interior of the automobile has had time to cool.
2