Husqvarna Xcite 60 Operator's Manual page 5

does occur. Let your dealer help you select the
right equipment.
• Always wear approved hearing protection. Long
term exposure to noise can result in permanent
hearing impairment.
• Always wear safety glasses or eye protection
while you operate the product or do maintenance
or repairs.
• Always wear protective shoes or protective
boots. Steel toes are recommended. Do not use
the product barefoot.
• Wear gloves when necessary, for example
when you attach, examine or clean the cutting
equipment.
• Do not wear loose-fitting clothing, jewelry or
other items that can get caught in moving parts.
• Do not wear shorts when you operate the
product.
• Keep first aid equipment and fire extinguisher
close at hand.
Safety instructions before installation
of the mulch kit
WARNING:
instructions that follow before you use
the product.
• Park on level ground.
• Set parking brake.
• Set the control levers in the neutral position.
• Stop the engine or motor and remove the key.
• Make sure that all moving parts stop before you
install the mulch kit.
Safety instructions for maintenance
WARNING:
instructions that follow before you use
the product.
2225 - 001 - 02.10.2023
Read the warning
Read the warning
WARNING:
and can cause injury or damage to
property or the adjacent area. Do not
do maintenance on the product or the
cutting deck without these conditions:
• The engine or motor is off.
• The product is parked on a level
surface.
• The parking brake is applied.
• The key in stop position and
removed.
• The blades are disengaged.
• All moving parts have stopped.
• The ignition cables are removed from
the spark plugs if applicable.
WARNING:
from an engine contain carbon
monoxide, an odorless, poisonous and
very dangerous gas. Do not run the
product in closed spaces or spaces with
no sufficient air flow.
• Keep the product in good working order. Replace
worn or damaged parts.
Use caution when servicing blades. Wrap the
blade(s) or wear gloves. Replace damaged
blades. Do not repair or alter blade(s).
If equipped, disconnect spark plug wire(s) and
the negative battery cable before making any
repairs.
For best performance and safety, do
maintenance on the product regularly as given in
the maintenance schedule. Refer to
schedule on page 7 .
• The blades are sharp and can cause cuts. Wind
protection around the blades or use protective
gloves when you do work on the blades.
• Make sure that all nuts and bolts are tightened
correctly and that the equipment is in good
condition.
• The product is approved only with the equipment
supplied or recommended by the manufacturer.
• Use only original parts for repairs. The use of
other parts voids the warranty.
The product is heavy
The exhaust fumes
Maintenance
5