Table of Contents
Advertisement
Set Mode Item 26 [ M/T-CL ]
Function: Selects the MONI key (just below the PTT switch) function.
Available Values: MONI/T-CALL
Default: Depends on the transceiver version.
MONI: Pressing the MONI key causes the Noise/Tone Squelch to be over-ridden, allow-
ing you to listen for weak (or non-encoded) signals.
T-CALL: Pressing the MONI key activates a 1750-Hz burst tone, used for repeater access
in many countries (especially in Europe).
Set Mode Item 27 [ MW MD ]
Function: Selects the method of selection of channels for Memory Storage.
Available Values: NEXT/ LOWER
Default: NEXT
NEXT:
Stores the data into the memory channel which is next-highest from the last-
stored memory channel.
LOWER: Stores the data into the next-available "free" channel.
Set Mode Item 28 [ NAME ]
Function: Toggles the display indication between "frequency" and the channel's "Alpha/
Numeric Tag."
Available Values: FREQ/ALPHA
Default: FREQ
Set Mode Item 29 [ NM SET ]
Function: Stores Alpha-Numeric "Tags" for the Memory channels.
See page 39 for details.
Set Mode Item 30 [ OPNMSG ]
Function: Selects the Opening Message that appears when the radio is powered on.
Available Values: DC/MSG/OFF
Default: DC
DC:
DC supply voltage
MSG: Set by user. See below.
OFF: No Opening Message
Here's how to program the Opening Message:
1. Set this Set Mode Item to "MSG."
2. Press the [ V/M ] key momentarily to enable programming of the opening message. You
will notice the first character entry's location blinking.
3. Rotate the DIAL knob to select the first letter/number of the message, then press the
[ V/M ] key momentarily to save the first letter/number and move on to the next charac-
ter.
VX-2R O
PERATING
S
M
ET
ODE
M
ANUAL
( M
S
ET
S
UMMARY
) M
ENU
ODE
69
Hide quick links:
Advertisement
Table of Contents
