Download Print this page

Yaesu VX-6R Brochure & Specs page 3

144/430 mhz dual-band hand-held fm transceiver
Hide thumbs Also See for VX-6R:

Advertisement

Outdoor-ready Features including Waterproof
Rating, Emergency Automatic ID (EAI) system,
and Weather Sensor Capability
The VX-6R/E includes a host of features ideally
suited for use in the outdoor environment, especially
in search-and-rescue situations!
Compact Polycarbonate Resin and Aluminum
Die-Cast Case with Solid Waterproofing Seal
(guaranteed at depth of up to 3 feet for 30 minutes)
The VX-6R/E is rated to JIS7 specifications for
submersion (up to 30 minutes at a depth of up to
three feet), and because the microphone jack is
sealed against water ingress, you can even use
the CMP460 Speaker-Microphone while maintaining
the submersibility of the VX-6R/E!
Waterproof Connectors
and Microphone Jack
Weather Sensor Capability
The optional SU-1 Barometric Pressure Sensor
unit permits monitoring of sudden weather
changes by monitoring atmospheric pressure.
Although not designed for precise pressure
measurements, it can be a valuable tool for
alerting you to possibly-
dangerous changes in
weather conditions.
Barometric Pressure
SU-1
Altitude
Three Powerful Emergency Features
EAI Feature: Ideal for Outdoor Operation!
The EAI feature lets you and your support team
configure your radios so that, in the event of a
climbing or hiking accident that leaves one of you
incapacitated, someone else can command your
VX-6R/E to transmit without you pressing the
PTT, allowing the others to use your signal to
perform direction finding and effect a rescue.
Emergency Feature
An "Emergency" function is also provided that
will transmit your Callsign on the UHF Home
Channel, while simultaneously flashing the CW
ID in bright white light on the transceiver s LED
and beeping the CW ID loudly from the speaker.
Easy-to-Use Ultra-Bright Emergency Flashing LED
In an emergency, the transceiver's
LED may be engaged continuously
in its "Bright White" mode, instead
of the usual red or green color,
and may be used as a signal
lamp or flashlight.
Five Watts of Power Output, using
High-Capacity Lithium-Ion Battery (supplied)
The supplied FNB-80LI (7.4 V/1400 mAh)
provides up to 5 Watts of power output on both
the 144 and 430 MHz bands. This high battery
capacity provides a typical operating time of 7
hours, depending on operating conditions.
Charger Information Display
Red and Greed LEDs, plus
the LCD, provide real-time
monitoring of the status
of battery charging.
The optional FBA-23 Battery Case permits
emergency operation using two AA Alkaline
batteries (not supplied.) For emergency transmission,
a power output of 0.3 Watts is available, or 0.05
Watts on the "Low" power setting. For receive-
only operation, a pair of AA cells will provide
approximately 15 hours of operation.
If you connect the E-DC-6 External DC Cord, or
the E-DC-5B DC Cable with Cigarette Lighter
Plug, you can operate the VX-6R/E at full power
and charge the battery at the same time.
Wide-band Receiver Coverage
for Catching All the Action!
In addition to full operation on the 144 and 430
MHz Amateur bands, the VX-6R/E provides a
wide range of monitoring excitement, thanks to
its receiver s incredible frequency coverage of
504 kHz to 998.99 MHz. We recommend the use
of an external antenna for best performance on
particular bands of interest, such as Shortwave.
Cellular coverage is blocked and non-restorable.
Convenient Selective Calling and Paging Features!
Submersible Mic Plug
New Two-Tone CTCSS Paging
The Two-Tone CTCSS Paging function utilizes a
pair of alternating subaudible tones for selective
calling. The LCD will indicate if a call came in
that you missed, allowing you to return the call.
50-Tone CTCSS Tone Squelch and
Digital Code Squelch Systems
For everyday repeater and public-service operations,
full-featured CTCSS and DCS Encoder/Decoder
systems are built into every VX-6R/E. DCS
Inversion is also provided, and the CTCSS
Reverse Tone
receiver when a particular CTCSS tone is
received (helpful if more than one repeater is
within range, and you want to null out one of
them). CTCSS and DCS Tone/Code Search are
also provided, along with an alarm bell feature.
Auto-Range Transponder System (ARTS)
ARTS uses the power of DCS signaling to provide
a
handshake
equipped radios, to verify communication range.
Versatile Scanning for the Monitoring Enthusiast!
The wide array of high-speed scanning features
of the VX-6R/E provide you with many avenues
of monitoring pleasure. Among the scanning
features are:
VFO Scanning of the entire band or a programmed
(PMS) band segment, with the ability to skip over
constant-carrier "nuisance" channels.
Memory Scan of all memories, two types of
Name Tag "wild card" scanning, scanning of memories
just on a particular band, scanning of specially-
designated memories only, and scanning of the
PMS memories. You can also designate certain
memories to be skipped during scanning.
Scanning within a particular Memory Bank.
Scanning of multiple Memory Banks via the
"Memory Bank Link" mode.
capability can also mute your
capability between two ARTS-
Outstanding Power-Management Features
New "Wake-Up" Feature Checks for
Activity when Radio is Turned Off!
The new "Wake-Up" battery saver feature
provides unparalleled preservation of battery
current. With "Wake-Up" engaged, "WAKEUP"
will appear on the display but otherwise the
transceiver is turned completely off; every 5 to 30
seconds the VX-6R/E will turn itself back on and
check for activity on the current operating
frequency. If no activity
is found, the radio will
go back to sleep for
another 5 to 30 seconds.
Additional battery saving features include:
Automatic Power-Off (APO), that turns the radio
off after a programmed period of keystroke activity.
Password Feature, that lets you engage a four-
digit password requirement for operation; this
can prevent children or other unauthorized users
from turning your radio on and draining the battery.
Receive Battery Saver, that turns off most transceiver
functions but periodically (0.2/0.3/0.5/1/2 sec.)
checks the current operating frequency for activity.
TX Battery Saver, that automatically turns the
transmitter power down when you are in contact
with an extremely strong local station.
On Timer, that lets you program the time of day
when the radio will automatically turn on, eliminating
the need to leave it on during times when you
won t be available to use it.
DC Voltmeter, that lets you monitor the status
of the internal battery or external power source.
Big-Radio Features in a Compact Package!
Easy access to WiRES Internet Linking system
via 64 special DTMF memories plus SRG (Sister
Radio Group) one-digit access without touching
a DTMF key
Microphone Gain adjustment
Key Beep level adjustment
minimize wind noise right after the PTT switch is
pressed, especially when using a VOX headset
CW Training feature that can send five-
character Morse Code groups, to help you
improve your code proficiency.
Performance Features for the
Experienced Hand-Held User!
Channel counter function for determining the
frequency of a nearby station
automatic 31-channel scanning/loading system
10 dB Attenuator for use in strong-signal
environments
Time-Out Timer (TOT) that will
disengage transmission after programmed time
interval (to prevent interference to others caused
by accidental "stuck microphone" condition
Busy Channel Lockout (BCLO) feature prevents
transmission when the current frequency is in
use
RF Squelch keeps receiver muted until a
signal exceeding a certain S-meter reading is
received
16-digit, 10-memory DTMF Autodialer
for Autopatch use
Automatic Repeater Shift (ARS)
Opening "Splash Screen" message is programmable
Wide range of available options.
Power Output/Power Source Chart (Approximately)
HIGH
LOW3
FNB-80LI or EXT DC
5W
2.5W
( )220 MHz/USA Version
(1.5 W)
(1.0 W)
FBA-23
0.3W
2 "AA" Alkalines
Battery Operating Times (Approximately)
Band
FNB-80LI
144 MHz
7 hours
430 MHz
6 hours
Receive Only
15 hours
Note:
Operating times may vary depending on operating conditions,
and are based on a duty cycle of 6 seconds of transmission at 5
Watts, six seconds of reception at 50% audio level, and 48
seconds of standby operation.
PTT Delay, to
Smart Search
LOW2
LOW1
1.0W
0.05W
(0.5 W)
(0.2 W)
0.05W
Battery Case
6.5 hours

Advertisement

loading

This manual is also suitable for:

Vx-6e