Yaesu FT-857D Operating Manual page 110

M O
ENU PERATION
MENU MODE No•061 [ MTR ATX SEL ]
Function: Selects the analog meter display configuration while the transceiver is transmit-
ting.
Available Values: PWR, ALC, MOD, SWR, VLT, N/A, OFF
Default: PWR
PWR: Indicates the relative transmit power.
ALC: Indicates the relative Automatic Level Control voltage.
MOD: Indicates the deviation level.
SWR: Indicates the Standing Wave Ratio (forward:reflected).
VLT: Indicates the battery voltage.
N/A: Not available at this time.
OFF: Disables the meter.
MENU MODE No-062 [ MTR PEAK HOLD ]
Function: Enabling/disabling of the "peak hold" function of the meter.
Available Values: OFF/ON
Default: ON
MENU MODE No-063 [ NB LEVEL ]
Function: Setting of the blanking level for the IF Noise Blanker.
Available Values: 0 ~ 100
Default: 50
MENU MODE No•064 [ OP FILTER 1 ]
Not available at this time.
MENU MODE No•065 [ PG A ]
Function: Programming the [ A ] key [in Operating Function Row "q" (MFq)] function.
Available Values: All Multi Functions, all Menu Items (except Menu #065 through 070),
MONI, Q.SPL, TCALL, ATC and USER.
Default: MONI
MENU MODE No•066 [ PG B ]
Function: Programming the [ B ] key [in Operating Function Row "q" (MFq)] function.
Available Values: All Multi Functions, all Menu Items (except Menu #065 through 070),
MONI, Q.SPL, TCALL, ATC and USER.
Default: Q.SPL
MENU MODE No•067 [ PG C ]
Function: Programming the [ C ] key [in Operating Function Row "q" (MFq)] function.
Available Values: All Multi Functions, all Menu Items (except Menu #065 through 070),
MONI, Q.SPL, TCALL, ATC and USER.
Default: ATC
108 FT-857 Operating Manual