Panasonic Omnivision PV-M1337 Operating Instructions Manual page 8

Combination vcr
Hide thumbs Also See for Omnivision PV-M1337:
Table of Contents

Advertisement

y One Time Setup
A
check list before you begin.
C Your Combination VCR is connected to an
Antenna, or Cable system (see page 5).
Using the
4, ¥ QD keys
Whenever a menu or program screen
is displayed, CHANNEL UP/DOWN and
VOLUME UP/DOWN on the remote
control function as 4 œ <] [> onty.
For VOLUME UP/DOWN functions, use
the buttons on the Combination VCR.
To Set Language, Channels, and Clock
When the Combination VCR power is first turned on the channel auto set and
set clock screens appear automatically.
|
ə
| Push POWER to turn the
FA
Combination VCR on.
A | nA
Y Or pio
SELECT LANGUAGE
= _] on-screen displays in
9r
English, Spanish or French.|
uan cha :Engtish
-h
Mal
' © If you choose the wrong
denon
A
E
een
language, please see the
APP,
VOL + :Frangais
or
"Reset all Combination VCR
Memory Functions" section on page 23.
LE
; © If you use a cable box, the cable box must be left on
for auto Channel set.
Important: If you use a cable box,
(S)
__
turn it on and select PBS
oie
|
Station in your time zone. | ano IF vou USE A CABLE
BOX, TUNE
IT TO YOUR
These on-screen displays will appear in sequence.
x CH AUTO SET PROCEEDING
x CH AUTO SET COMPLETED
x AUTO CLOCK SET PROCEEDING
SETTING
: CH
10
AUTO CLOCK
SET
COMPLETED
PUSH CH UP KEY
AUTO CLOCK
SET
IS | NCOMPLETE
PUSH MENU TO SET CLOCK
END
:
Confirm that displayed time is correct and
push a to exit.
if the displayed time and D.S.T. are incorrect,
In the rare event that you live within broadcast range of two PBS
stations in two different time zones, the Combination VCR may
recognize the wrong PBS station. To correct this situation, do the
following:
a.
Make a note of the SETTING: CH number shown on-screen and push am
to exit.
b.
Delete the setting channel from the Combination VCR channel memory.
(See the Add or Delete a Channel section on the next page.)
c.
Push MENU to display the menu.
d.
Push 4 œ < [> to select "CLOCK?" and then push MENU to display the
SET CLOCK screen.
e if you use a cable box and have multiple PBS stations, tune the cable
box to a different PBS station and try auto clock set again using the
menu.
e.
Push a Y to select "AUTO SET,' and then push [>to set and to «start.
x Auto clock set will be performed when the Combination VCR is
NN
turned off the first time each day. If you use a cable box and you want
auto clock set to be performed, the cable box must be left on and
NOTES
ee
the PBS channel at the time the Combination VCR power is
turned
off.
N
e If for any reason the time is changed manually, automatic time
correction will not occur.

Advertisement

Table of Contents
loading

Table of Contents