Table of Contents
Advertisement
Ep Before Requesting Service
Check the following points once again if you are having trouble with your Combination VCR.
Power
Correction
+ Completely insert the Power Plug into an AC wall outlet.
e Set the POWER button to ON.
Monitor
Correction
No picture or sound...
* Make sure your antenna or cable system is connected to the
Combination VCR.
(P. 5)
* Check that the power plug is completely plugged into an AC
outlet.
e Check that the POWER button is set to on.
Poor picture with normal sound...
* Adjust the BRIGHT, SHARPNESS, and PICTURE controls in
the SET UP TV menu.
(P. 12)
Poor sound with normal picture...
x Adjust the VOLUME control. (P. 11)
Poor TV reception...
e Adjust the SHARPNESS and PICTURE controls in the SET
UP TV menu.
(P. 12)
No color or poor color...
s Adjust the TINT and COLOR controls in the SET UP TV
menu. (P. 12)
Ghost (multiple) images...
s Install a directional antenna.
TV programs cannot be watched...
s Make sure that the channel being received is in the
Combination VCR's memory.
(P. 8)
Correction
TV program cannot be recorded...
* Make sure your antenna or cable system is connected to the
Combination VCR,
(P 5)
e Make sure that the record tab is intact on the cassette.
(P. 23)
Timer recording cannot be performed...
* Set the recording Start/Stop time correctly. (P. 20-21)
s Timer recording may not be performed or continued if a
power interruption of more than 1 minute occurs before or
during a Timer Recording, even if power resumes thereafter.
No playback picture, or the playback picture is | + Adjust the TRACKING control in either direction. (P. 16)
noisy or contains streaks...
VCR cannot be controlled...
e Make sure that VCR LOCK is set to off. (P. 22)
24
Advertisement
Table of Contents
