Xerox DocuMate 262i User Manual page 63

Scanning
58
To Scan Using Configure Before Scan
1. Put the documents in the scanner's ADF tray or on the flatbed glass.
2. Click on the button you set to use the Configure Before Scan option.
In the example shown on the previous page, the scanning option 9
has been set to use Configure Before Scan.
3. The TWAIN interface will open.
4. Choose the Options applicable to your scan batch.
5. Click on the Scan button in the TWAIN interface.
6. Your documents will be scanned and sent to the Destination
Application specified in the One Touch 4.0 Properties.
In the example shown on the previous page, the Destination
Application is Microsoft Paint.
Please see "Scanning with the TWAIN Interface" on page 75 for
instructions on using the scanning features found in the TWAIN interface.
DocuMate 262i Scanner User's Guide