Xerox Phaser 8860 System Administrator Manual page 89

Phaser PJL Commands
The following table lists the most commonly used HP PJL and Xerox-unique PJL commands.
See also:
HP Printer Job Language Technical Reference for the standard set of PJL commands.
PJL Command/Parameter
@PJL FSAPPEND FORMAT:BINARY
SIZE=size NAME="pathname"
@PJL FSDELETE NAME="pathname"
@PJL FSDIRLIST NAME="pathname"
@PJL FSDOWNLOAD FORMAT:BINARY
SIZE=size NAME="pathname"
@PJL FSINIT VOLUME=value
@PJL FSMKDIR NAME="pathname"
@PJL FSQUERY NAME="pathname"
@PJL FSUPLOAD NAME="pathname"
@PJL USTATUS
@PJL USTATUSOFF
@PJL XCLIENTJOBID=value
@PJL XJAFILENAME="filename"
Values
*
*
*
*
*
*
*
*
*
n/a
Exactly 48 bytes
(first byte is 8 and
the 8 last bytes
represent a time in
the format
hhmmsshs.
Roman-8
characters
1-255
System Administrator Guide
B-5
Description
Appends data to an existing file,
or if the file doesn't exist, creates
the file and loads it with the given
data.
Deletes a file from the internal
hard drive.
Lists PJL system files and
directories.
Downloads a file to the internal
hard drive.
Initializes the internal hard drive.
Creates the specified directory
on the internal hard drive.
Determines if the name exists
and, if so, if it is the name of a file
or a directory. If it is the name of
a file, it provides the file's size in
bytes.
Uploads file from the printer to
the host.
Allows the printer to send
unsolicited status messages for
device status changes,
end-of-job status, and pages
printed. Status can be sent at
specified time intervals.
Turns off all status responses.
Sets the client job id used with
PrintingScout.
Sets the file name for Job
Accounting.