JVC CA-MXS3BK Service Manual page 12

CA-MXS 3BK
COMPUUPLAY
Radio
Three ways to tune in
a station
Cru | ae
MWAW
How to preset AM
(MW/LW) and FM
radio stations
MEMORY
FM MODE/MUTE
Page 9
1-12 (No. 20373)
Listening to the Radio
One Touch Radio
Tuning in a Station
Press AM (MW/LW) or FM to turn on the radio. The display shows the frequency of the station tuned to.
You have 3 ways to select a station:
1. Press and release TUNING < or > to move from station to station until you find the one you want.
OR
2. Hold down TUNING <or >, and the display cycles through all the stations one after the other. Release
the button when you see the one you want.
OR
3. Press once and release PRESET > to go to the next preset station, or hold PRESET < to cycle through
the preset stations: release the button when the preset station you want shows on the display.
Presetting Stations
To preset radio stations:
1. Tune in the station you want to set.
2. Press MEMORY.
Q On the display, MEMORY will blink for 8 seconds. During these 8 seconds while MEMORY
Receiving in Stereo or Mono
When an FM strereo broadcast is hard to receive or noisy:
Q Press FM MODE/MUTE sothat reception improves although you loose the stereo effect. In this
state, you will hear noise while tuning into stations.
Q Torestore stereo effect, press FM MODE/MUTE again sothat""AUTO" appears on the display.
In this state, when a program is broadcast in stereo, you will hear stereo sound; when in
monaural, you will hear monaural sounds. Furthermore, in this state, you won't hear noise while
tuning into stations.