Xerox Phaser 7400 User Manual page 40

4. If you loaded paper or media with a height less than 111 mm (4.4 in.), open the left-side
output tray.
1
5. When the control panel prompts you to confirm the type and size of paper in the tray, press
the OK button to use the current tray setup. If you loaded a new size or type of paper in the
tray, do the following:
a. Select Change
b. Select the appropriate paper type, and then press the OK button.
c.
Select the paper size, and then press the OK button. If you are using Letter or A4 size
paper, select the paper size without the letters SEF.
3
2
setup, and then press the OK button.
Phaser® 7400 Color Printer
3-11
Loading Paper
7400-012