3.
Insert the paper into Tray 1 (MPT), and adjust the paper guides to fit the paper.
The paper can be loaded with either the long or short edge entering first, as shown in
■
the illustrations.
■
The maximum width is 216 mm (8.5 in.).
■
For single-sided printing, if you are using preprinted or prepunched paper, place the
side to be printed facedown with the top of the paper entering the printer first.
■
For automatic 2-sided printing, if you are using preprinted or prepunched paper,
place the first side to be printed faceup with the bottom of the page entering the
printer first.
Single-Sided Printing
4.
On the control panel, select
5.
Select the paper type, and then press the OK button.
6.
Do one of the following:
■
If your custom paper size is listed in the menu, select it, and then press the OK button.
■
If your custom paper size is not listed in the menu, select
press the OK button.
6360-064
, and then press the OK button.
Change setup
Phaser® 6360 Color Laser Printer
3-45
Printing on Specialty Media
6360-065
2-Sided Printing
, and then
New Custom Size