Xerox Phaser 6130 User Manual page 77
Xerox phaser 6130: user guide
Hide thumbs
Also See for Phaser 6130:
- Service manual (454 pages) ,
- (145 pages) ,
- Supplementary manual (3 pages)
Table of Contents
Advertisement
Using the PostScript Driver
The procedure to print on custom size paper using the PostScript print driver is as follows.
1.
From the File menu, select Print.
2.
Select this printer as the printer to be used and click Preferences.
3.
Select the Paper/Output tab.
4.
From Paper Size, select Custom Page Size.
5.
Specify the length of the short edge and long edge under Setting For. You can specify the
values either by entering them directly or using the Up Arrow and Down Arrow buttons.
The length of the short edge cannot be longer than the long edge, even if it is within the
specified range. The length of the long edge cannot be shorter than the short edge, even if
it is within the specified range.
6.
Select the appropriate paper tray from Paper Tray.
7.
Select the appropriate paper type from Paper Type and click OK.
Phaser® 6130 Printer
4-33
Printing Custom Size
- Quick Links:
- Problems with the Printer
Hide quick links:
Advertisement
Table of Contents
