Xerox DocuPrint N4025 User Manual page 107

XPD005
XPD006
PrinterMap User Guide
None
Description
Discover process cannot retrieve valid SNMP time-out values from PrinterMap ini
file ([Drive]:\[Install Directory]\pmap.ini). Either the pmap.ini file cannot be
found or the SNMP time-out entries are corrupt or missing. The following are the
SNMP time-out entries as they should appear in the [discover] section of the
pmap.ini file (shown with default shipped values in hundredths of a second):
snmp_get_local_timeout=40
snmp_get_remote_timeout=100
snmp_set_timeout=200
System Action
Default SNMP time-out values are used for all PrinterMap generated SNMP
queries. Default values are:
snmp_get_local_timeout default value is 400ms.
snmp_get_remote_timeout default value is 1000ms.
snmp_set_timeout default value is 20s.
User Action
Verify the pmap.ini file exists and that the entries mentioned above are present.
Text
Local machine not configured for IP protocol support.
Variables
None
Description
The discover process detected that PrinterMap is configured to do an IP network
Discover. The local machine is not configured for IP protocol support. The
discover process cannot continue.
System Action
Discover process terminates.
User Action
Verify the PrinterMap discover process is configured correctly and/or the local
machine is properly configured for the IP protocol before attempting another
PrinterMap discover.
Text
Local machine not configured for IPX/SPX protocol support.
Variables
None
91