Printer Features; Paper Handling - Xerox DocuPrint N2025 User Manual

Printer Features

Paper Handling

Your printer has many special features that allow you to
achieve the results you need for your specific print job.
Features vary slightly according to the options you are
using and the memory installed in your printer. This
section will help you become familiar with your printer's
features and capabilities.
Your printer has several paper source and paper output
options as described below and in Figure 1.5 on page 1-8.
For a listing of supported media types and sizes, refer to
the section "Selecting Print Media" (page 2-2).
Paper Sources
• The standard multi bypass feeder
single sheet manual feed tray or a tray for up to 150
sheets.
• Tray 1 is the standard 500 sheet input source.
• Tray 2 is the optional input source installed
immediately below Tray 1. This may be a 500 sheet
feeder or the 2,000 sheet feeder.
• Tray 3 is the optional input source installed
immediately below Tray 2. This is only available if Tray
2 is not the 2,000 sheet feeder, and may be another
500 sheet feeder or the 2,000 sheet feeder.
Trays 1, 2 and 3 all have automatic paper size sensing, low
paper sensing, and paper out sensing. The multi bypass
feeder has low paper sensing and paper out sensing. Refer
to Chapter 2: Loading Print Media for instructions on
loading the trays.
Chapter 1: Getting to Know Your Printer

Printer Features

functions as either a
1-3