Xerox DocuPrint 4517 User Manual page 203

8
Roll the HCF to its permanent position and lock down the casters. Load paper in the HCF, as
described in the section "Using the High Capacity Feeder" (page 2-14). Reconnect the
printer interface cord(s) and power ON the printer.
After warming up, the Control Panel displays:
Online
Ready
If any other message is displayed, see Table 6.2 starting on page 6-6.
9
Press Online , then Reset
Reset Menu
Reset Printer
10
Press Down and you see:
Reset Menu
Reset Menus
11
Press Enter and the message display changes to:
Reset Menus
Please Wait...
The printer resets the Source Mapping (PCL Emulat) settings to include the HCF. When the
reset is finished, the display changes to:
Online
Ready
A p p e n d i x C : I n s t a l l i n g a n d R e m o v i n g P r i n t e r O p t i o n s
2 , 0 0 0 - s h e e t H i g h C a p a c i t y F e e d e r ( H C F )
7
Attach the HCF short power cable (1)
between the printer and the HCF. Attach
the long power cord (2) between the HCF
and the power source.
and you see:
C-35