Xerox Docucolor 2045 / 2060 / 5252 / 6060 / 7000/ 8000 Digital Color Press; Limitations; System Dependencies And Prerequisites; Configuration Guide - Xerox DocuColor 5252 Planning Manual

Xerox Document Binder 120-D (DB120-D)
2. Xerox DocuColor 2045 / 2060 / 5252 / 6060 / 7000/ 8000
Digital Color Press

Limitations

System Dependencies and Prerequisites

Configuration Guide

•
When connected inline with a printer, the minimum binding
capacity is 3 sheets / 2045, 4 sheets / 2060 and 2 sheets /
5252, 6060, 7000 and 8000 using 20lbs (75 gsm) bond
paper. (In walk-up manual mode, the minimum binding
capacity is 1 sheet 20 lbs (75 gsm) bond paper.)
•
The DB120-D is compatible with 8.5 x 11" (A4 in Europe)
paper in weights ranging from 20 – 110 lbs (75 – 200 gsm)
bond and flush cut tabs.
Note: Weights above 32 lbs (120 gsm) should only be used as
covers, dividers or inserts.
Listed below are the dependencies and prerequisites for
installing the DB120-D.
•
A High Capacity Stacker / Enhanced High Capacity Stacker
is needed to connect the DB120-D inline with the Xerox
DocuColor 2045 / 2060 / 5252 / 6060 / 7000 / 8000.
•
A DFA Enablement Kit (675K11272) is required to connect
the DB120-D with the Xerox DocuColor 2045 / 2060 / 5252 /
6060 / 7000 / 8000.
•
A Feeding & Finishing Interface Unit kit (FFIU kit
497K02331) is required to connect the DB120-D with the
Xerox DocuColor 2045 / 2060 / 5252 / 6060 / 7000 / 8000.
The Configuration Guide contains diagrams over the various
Finishing Solutions that are available.
2-1