Xerox DocuColor 2045 Administration Manual page 29

T M
O O L S O D E
D C 2 0 6 0 / 2 0 4 5 S
O C U O L O R
Auto Resume Scan
Use the Auto Resume feature to restart a copy job automatically after a fault is
cleared and a scanned job is waiting for user instruction, or to restart a copy job
waiting for user instruction after the Job Interrupt button on the Control Panel
has been pressed.
1
Touch the Auto Resume Scan button on the System Timers screen. The Auto
Resume Scan screen appears.
2
Use the up or down arrow buttons to change the time. The range available is 1 to
10 minutes.
To use the system default time of 2 minutes, touch the System Default button.
3
Touch the Enter button on the screen to enter the new time into the system.
4
Touch the Close button to return to the Machine Defaults 1 screen, or select
another timer to change.
A
Y S T E M D M I N I S T R A T I O N
Figure 24. Auto Resume Scan screen
G
U I D E
1–29