Adjustable Clutch - Bosch GSR18V-800C Operating/Safety Instructions Manual

Mode Selector Ring
(Fig. 7)
The Mode Selector Ring 3 allows the tool to be
set for various drilling or driving applications.
Turn the mode selector ring right or left depend-
ing on the below applications.
Drill only action: This mode will lock up
the clutch to permit drilling and driving
heavy duty work, and also will enable
bits to be changed quickly and easily in
the keyless chuck.
Driver mode: To drive screws, nuts, and
bolts with use of the adjustable clutch
settings to limit torque and power out-
put to prevent over driving and fastener/
workpiece damage.
Drill with hammer action (GSB18V-
800C Model only): For drilling in con-
crete, asphalt, tile or other similar hard
materials. The hammer drill position
overrides the clutch for drilling.

Adjustable Clutch

(Fig. 8)
Your tool features 20 clutch settings. Output
torque will increase as the Adjustable Clutch 2
is rotated from 1 to 20. The tool will stop rotat-
ing as soon as the set torque is reached during
operation.
Brake
When the trigger switch is released it activates
the brake to stop the chuck quickly. This is espe-
cially useful in the repetitive driving and removal
of screws.
14
2610070413 GSR18V800C 202308.indd 14
Operating Instructions page heading
Fig. 7
Fig. 8
(3)
(2)
8/3/23 11:05 AM