Tabs; General Tabs - Xerox WorkCentre Pro 232 Driver Manual

Tabs

Features vary on the driver tabs depending on the driver type and installable options.

General Tabs

These driver tabs are accessed through your application's print dialog. Driver setting changes on these
tabs apply to the open document and application, and are temporary.
The Paper/Output tab has the most frequently used features. For example, you can choose to print on
two sides of the paper, select specific media on which to print, or delay your print job to a time specified
by you. The Paper/Output tab also presents the finishing options, which may include—depending on the
type of finisher you have installed—collate, staple, fold, or punch options.
If you have enabled the optional Bi-Directional communication for your printer driver, a Status button is
added to your Paper/Output tab. When you click Status, the Status dialog opens and reports specific
information about the printer's operational status as well as specific information about your print jobs.
See Status Dialog on page 2-23.
The Special Pages tab has features for adding Covers, Inserts, and Exceptions (specifying media/page
characteristics on a per-page basis).
The Image Options tab groups together those features that are related to image manipulation, such as
Reduce/Enlarge or Mirror Image, a feature that flips the image from left to right, thereby
, Lighten/Darken,
reversing the image and all associated text.
The Layout/Watermark tab contains all features that relate to Page Layout and Watermarks.
The Advanced tab contains those features that infrequently change once set, such as Banner Sheet,
Request Offset, TrueType Font options, and Custom Paper Sizes.
Tabs 3-3