Point And Print Installations; Installing Printer Drivers On Other Networks - Xerox WorkCentre Pro 232 Driver Manual

Point and Print Installations

This procedure assumes that a Xerox system on a network server has been installed with the appropriate
CentreWare printer driver prior to performing Point and Print.
If you would like to standardize the device settings and document settings for the Windows NT / 2000 /
XP / Server 2003 printer drivers, see Preconfiguring Default Driver Settings (Windows NT / 2000 / XP /
Server 2003) on page 2-16 before installation.
To perform Point and Print:
1
At the client workstation, access the desired network Xerox system through Network
Neighborhood (Windows 98 / NT) or My Network Places (Windows Me / 2000 / XP /
Server 2003). Browse to your printer.
2
Double-click the Xerox system icon. At the prompt, select to install the printer driver. The Add
Printer Wizard opens.
–or–
Right-click the Xerox system icon. At the prompt, select to install the printer driver. The Add Printer
Wizard opens.
–or–
Click the Xerox system icon. Drag and drop the printer icon on the Printers folder. The Add Printer
Wizard opens.
N :
To install printers on Windows 9x clients, use the right-click method; drag and drop may
OTE
yield unexpected results.
3
Follow the Add Printer Wizard instructions. The appropriate files for the selected Xerox system
download to the client workstation.

Installing Printer Drivers on Other Networks

The Xerox Printer Driver Installation utility supports Windows networks. To install drivers in other
networks, follow the network operating system's procedures for creating print servers, printers, and
queues. You may then be able to use Microsoft's Add Printer Wizard to install drivers on Windows
clients and attach the clients to queues.
Point and Print Installations 2-15