Chapter 4: AMI BIOS
4-8 Input/Output
Set all options for the motherboard I/O in this section.
SATA
SATA Controllers
This item Enables or Disables the built-in SATA controllers on the moth-
erboard. The options are Enabled and Disabled.
SATA Mode Selection
This item selects the mode for the installed SATA drives. The options are
IDE, AHCI and RAID.
*If the item SATA Mode Selection above is set to AHCI, the fol-
lowing items are displayed:
Port 0 ~ Port 5
This item Enables or Disables SATA Ports 0~5. The options are Enabled
and Disabled.
Hot Plug
This feature designates the SATA port specified for hot plugging. Set this
item to Enabled for hot-plugging support, which will allow the user to
replace a SATA disk drive without shutting down the system. The options
are Disabled and Enabled.
4-21