Bootup Numlock State; Wait For "F1" For Error; Re-Try Boot; Power Button Function - Supermicro C7Z170-M User Manual

Supermicro C7Z170-M/C7H170-M Motherboard User's Manual

Bootup NumLock State

This option sets the state to which the NumLock key is configured when
booting. The options are Enabled and Disabled.

Wait for "F1" for Error

This option sets whether the system will wait for the user to press "F1"
when an error is detected during POST. The options are Enabled and
Disabled.

Re-try Boot

Select Enabled to force the system to reboot when system fails to boot.
The options are Disabled and Enabled.

Power Button Function

This feature controls how the system shuts down when the power but-
ton is pressed. Select 4 Seconds Override for the user to power off the
system after pressing and holding the power button for 4 seconds or
longer. Select Instant Off to instantly power off the system as soon as
the user presses the power button. The options are Instant Off and 4
Seconds Override.

AC Loss Policy Depend on

Use this feature to set the power state after a power outage. Select
Power-Off for the system power to remain off after a power loss. Select
Power-On for the system power to be turned on after a power loss. Select
Last State to allow the system to resume its last power state before a
power loss. The options are Stay Off, Power On and Last State.

EuP Support

EuP, or Energy Using Product, is a European energy-saving specifica-
tion that sets a standard on the maximum total power consumption on
electrical products. Check the box to activate EUP support. The default
is Unchecked (Disabled).
4-20