LG CineBeam HF60LG Owner's Manual page 116

68
[Auto Power]
(Q. Settings)
Makes the projector turn on automatically when the power cord is connected to
the projector.
•
[On]
When the power code is connected to the projector, it turns on automatically.
• [Off]
When the power code is connected to the projector, it goes into standby mode.
[High Altitude]
(Q. Settings)
If the projector is used at an altitude higher than 1200 meters, turn this on.
Otherwise, the projector may overheat or its protection function may be activated.
If this happens, turn the projector off and then on again after waiting for several
minutes.
• This feature is available on certain models only.
[LG Wireless Keyboard]
(Q. Settings)
This feature enables you to connect a LG wireless keyboard to your device.
Turn on the device, set it to pairing mode, and then click [CONNECT] on your
projector screen.
• Supported keyboard
- LG Rolly Keyboard
• If there is a LG wireless keyboard previously connected, it will be automatically
reconnected to your projector once your projector turns on.
•
To disconnect the existing connection, click [DISCONNECT].
• This feature is available on certain models only.
[General] [Auto Power]
[General] [High Altitude]
[General] [LG Wireless Keyboard]