Table of Contents
Advertisement
Firmware updates
Occasionally, Panasonic may release updated
firmware for this system that may add or improve
the way a feature operates. These updates are
available free of charge.
DO NOT DISCONNECT the AC mains
lead while updating the firmware.
During the update process, no other
operations can be performed.
Automatic updates
When a new update is available, this system will
update the firmware automatically after midnight if
it is not in use.
Connect this system to the network. (
Make sure that the network is connected to the
Internet.
Note:
•
If an update is detected during the network set up, updating
is performed as part of the network set up.
•
If a critical update is detected while the system is in use,
updating will be prioritised.
•
Updating may take longer or may not work properly
depending on the connection environment.
Manual updates
Preparation
Connect this system to the network. (
Make sure that the network is connected to the
Internet.
1
Press [NET].
2
Press [SOUND], [SUBWOOFER +],
[SUBWOOFER ‒] and [SOUND]
consecutively to check for update.
Press within 3 seconds between each button.
If an update is available, download will begin
automatically.
Indicators blink to show the progress of the
downloading.
20
3
Note:
Downloading may take longer or may not work properly
depending on the connection environment.
HDMI CEC
This unit supports "HDMI CEC" (Consumer
Electronics Control) function.
See the operating instructions for connected
equipment for operational details.
16)
Preparation
Confirm that the HDMI connection has been made.
(
Power on link
When the TV is switched on, the main unit also
switches on automatically. (This function does not
work when OPTICAL, NET or Bluetooth
source.)
Power off link
16)
When the TV is switched off, the main unit also
switches off automatically. (This function does not
work when OPTICAL, NET or Bluetooth
source.)
Volume adjustment
You can control the volume setting of this system
using the volume or mute button on the TV remote
control.
If the TV's speaker selection is changed to the TV
speakers, the main unit's speakers are muted.
Muting will be cancelled by selecting the main
10%
unit's speakers again.
20%
Changing speakers
When the main unit switches on, this system will
80%
be selected as the TV's speakers automatically.
When you switch off the main unit, TV speakers
will be automatically activated.
90%
Note:
The operation cannot be guaranteed on all HDMI CEC
equipment.
If there is no update, these indicators blink.
Update is installs when the download
complete.
During installation, the indicators scroll back
and forth until the installation complete.
8, 9)
is the
®
is the
®
Advertisement
Table of Contents
