Table of Contents
Advertisement
Auto off
The main unit is automatically switched off if there
is no audio input and when you do not use it for
approximately 20 minutes.
Press and hold [SUBWOOFER +] for a
minimum of 4 seconds to select the mode.
Mode
On (default)
Off
Note:
•
The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
•
The setting is maintained until it is changed again.
Volume limitation
The volume is set to 50 when you switch on the
system although the volume is set to above 50
before it is switched off.
Press [MUTE], [SOUND], [MUTE] and [SOUND]
consecutively.
Press within 3 seconds between each button.
Mode
On (default)
Off
Note:
•
The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
•
The setting is maintained until it is changed again.
Dimmer
You can dim or brighten the indicators on the main
unit.
Press and hold [SUBWOOFER ‒] for a
minimum of 4 seconds.
Note:
By default, this function is switched off.
Indication
Indication
Bluetooth
and Network standby
®
For Australia and New Zealand
This function automatically switches on the system
when you establish a Bluetooth
paired device or when this system is selected as
the network device's output speakers.
1
Press [
-PAIRING] or [NET].
2
Press [MUTE], [SUBWOOFER +], [MUTE]
and [SUBWOOFER +] consecutively to
switch on this function.
To switch off this function, press [MUTE],
[SUBWOOFER ‒], [MUTE] and
[SUBWOOFER ‒] consecutively.
Press within 3 seconds between each button.
Mode
On (default)
Off
Note:
•
The indicator for the selected setting blinks for 5 seconds
and then exits the setting mode.
•
The setting is maintained until it is changed again.
•
When the system is switched on by this feature, the
beginning part of the music may not be played back.
•
Depending on the app, the conditions for activating this
function may differ.
•
The system may not be switched on even when selected as
the output speakers. Start playback.
•
If the AC mains lead is disconnected, the standby function
may not work. Make the setting again.
connection from a
®
Indication
19
Advertisement
Table of Contents
