Xerox WorkCentre 450c Reference Manual page 2

q
4. Press the Feed button for approximately one
second and release (See Figure 2). This will engage
the feed rollers for a short period of time and allow the
Feed Roll Cleaning Pad to clean and restore the
surface texture of the feed rollers. Repeat this
process approximately 10 times.
q
6. Reverse the Feed Roll Cleaning Pad in the
paper Tray (long edge down) with the white side facing
out.
q
7. Press the Feed button for approximately one
second and release. This will allow the Feed Roll
Cleaning Pad to clean off the residue. Repeat this
process approximately 5 times.
q
8. Remove the Feed Roll Cleaning Pad with the
¼ inch stack of paper and insert fresh 20 lb. paper.
Insert the Printer Output Tray and make a print.
This completes the Instructions.
Any Questions?
1 - 800 - TEAM XRX
(1 - 800 - 832 - 6979)
F
HINT: It would be a good idea to save the
contents of this kit for future use if the Feed Rolls
become contaminated again.
Xerox Corporation
Global Knowledge & Language Services
800 Phillips Road - Bldg. 845-17S
Webster, New York 14580-9791
USA
©2000 Xerox Corporation. All rights reserved.
Printed in the United States of America
XEROX®, The Document Company ®,
the stylized X and the identifying product
names and numbers herein are trademarks
of XEROX CORPORATION.
Page 2 of 2
Feed Roll Cleaning Kit
Call:
Step 1:
Press the Feed button for approximately one
second and release.
PRINT
SCAN
Scan
Figure 2. Pressing the Feed Button
Thank You for choosing
The Document Company
XEROX
709P00850 Rev A
Enter
FAX
Ext/Clear
Job Status
COPY
Confirm
Menu
copy
Cover Page
Superfax
Mode
Fax
Size
Standard
Darken
Normal
Resolution
Feed
Photo
Lighten
Contrast
Cartridge
Control Panel
March 2000
DRB-FILE