Recalling Sets; Washed Out Documents When Scanning/Copying; Manual Feed; Manual Feed Media Source Will Be Ignored When Used With The Accxes Client Tools' Page Composition Feature - Xerox 6030 Release Note

pages ahead of the printer causing a queue that is larger than the system can hold. The solution
is to wait for several of the pages to complete printing before copying any additional documents.

8.3.9 Recalling sets

When a set is recalled, the scanner UI settings are not set to reflect their state for the last page
scaled, but are in a "neutral" state to prevent unintentional overriding of setting for the set. If a
setting (like scale, page size, etc) is changed it will affect the entire document set.

8.3.10 Washed out documents when scanning/copying

When scanning/copying documents with very low contrast (like poor blue line or sepia
documents) with dynamic background removal set to OFF can cause the system to threshold the
document and produce a very washed out document. Enabling background removal will actually
remove less of the background in this case.

8.4 Manual Feed

8.4.1 Manual feed media source will be ignored when used with the
Accxes Client Tools' page composition feature.
Go to Accxes Client Tools > Job Option tab > Composition tab > Select Overlay Images > Media
Source drop down menu. Although "Manual Feed" is listed as a choice of media source for page
composition jobs, the print job will be treated as if AUTO media source was selected. If an
appropriate roll of media is available, it will be printed on that media; otherwise, the job will query
until the correct roll media is installed. In addition, other Media Source selections will be treated
as AUTO if an appropriate roll of media is available in a different roll.

8.5 Web Print Manager Tool (WebPMT)

8.5.1 Printer Queue – Main WebPMT Screen
The FreeFlow Accxes Controller supports a maximum of 120 active printer jobs in the queue and
8 active copy jobs. If subsequent jobs are sent before the 128th prints, ports will refuse
connections and there can be scan errors; when there are fewer jobs in the queue, the jobs can
then be resubmitted or scanned. Additionally, completed jobs will be removed from the queue
display immediately to make room for the newly submitted print jobs. To avoid these issues,
keep the number of active print jobs to under the 128 limit.
NOTE: More than 128 files can be sent from the Document Submit Tool as one print job, but all of
the files in the print job must have printed before sending subsequent jobs, or the jobs will be
refused.

8.5.2 German users only

Zum Drucken von Etiketten mit Umlauten DRUCKERVORGABEN > DRUCKER-EINSTELLUNG
> Plot-Etiketten wählen.
Anschließend im Dropdown-Menü für Fonts einen der folgenden Fonts wählen: HP2 Stick Font
Latin - 1 oder HP2 Stick font Latin - 1 – Proportional.
Page 16