Xerox Document Centre 230 Install Manual page 2

d)
Press [ ] repeatedly to delete the
current entry.
e)
Use the [ ] or [ ] key to enter the
first character in the Printer Name.
f)
Press [ ] to move to the next charac-
ter. Repeat this procedure to enter the
entire Printer Name.
g)
Press [Enter]. **SAVED** is
displayed momentarily, followed by
>
Printer Name
.
(your entry)
6.
Save all the settings:
Reset Required
a)
Press [Online].
Press ENTER key
displays.
Warming Up
b)
Press [Enter].
Please Wait . . .
displays. The DC230LP will reboot,
save the settings entered, and print a
Configuration Report in approximately
3 minutes.
7.
Check the settings on the Configuration
Report against those entered to be sure
they are correct.
DC230LP AppleTalk
8.
To install the DC230LP Macintosh
a)
Copy the DC230LP Macintosh PPD
from the CentreWare
tem Folder/Extensions/Printer
Descriptions Folder.
b)
Set up and configure the Print Driver
via the Chooser.
9.
Refer to the CentreWare manual, Getting
Started with Print and Fax Services, for
additional information.
Additional information on the AppleTalk setup
can be found in the DC230LP System
Administration Guide, Network Installation and
Troubleshooting .
>
® Quick Install
®
PPD:
®
CD to the Sys-
Page 2 of 2
©1998 Xerox Corporation
701P98450 Version 1.0, 5-98