Frequently Asked Questions - Xerox DocuColor DocuColor 4 Quick Start Manual

Resources

Frequently asked questions

How long is the warm-up
How fast is the copier in full
color mode?
How fast is the copier in black
and white mode?
How do I select color copying
What happens when I run out
of one color dry ink (toner)?
What happens if I accidentally
put the wrong color dry ink
cartridge into the copier/
20
For more information, refer to the following publications:
DocuColor 4 LP/CP User Guide
DocuColor 4 LP/CP System Administration Guide
DocuColor 4 LP/CP Set-Up Guide
The DocuColor 4 Copier/Printer takes about 8 minutes after the power
period? is switched on before it is ready to make copies.
About 4 full color copies per minute, depending on the paper size and
feeding orientation of the paper.
Approximately 16 copies per minute using 8-1/2 x 11 in. or A3 paper
being fed long edge first.
You don't have to make any special selections for color copying. The
mode? copier defaults to full color setting. This means it will copy all colors
present in the original, or automatically switch to black and white mode
if the original does not contain colors.
The copier/printer gives you a warning message on the LCD screen to
order more dry ink when a particular color dry ink is running low.
When the ink supply is exhausted, the copier/printer will not make
copies in that color until the dry ink cartridge is replaced.
You can't. Each dry ink cartridge is keyed so it will only insert into the
proper color housing.
printer?
Getting to Know Your Product
QuickStart Practice Guide