Restoring Default Calibration Measurements; Calibrating The Fiery With The Dtp41 - Xerox DocuColor 12 Color Manual

2
2-10 Color Calibration

Restoring default calibration measurements

Use the following procedure to return to default preset calibration measurements.
T
O RESTORE DEFAULT CALIBRATION MEASUREMENTS
1. In the main Calibrator window, click Restore Device.
A warning message appears.
2. Click OK to restore the preset default calibration set.
Restore Device applies only to the currently selected calibration set.
N :
OTE

Calibrating the Fiery with the DTP41

Using the ColorWise Pro Tools Calibrator application and the DTP41
spectrophotometer, you can quickly measure color patches generated by the
copier/printer and automatically download these measurements to the Fiery.
Before using ColorWise Pro Tools and the DTP41 to calibrate the Fiery, follow
N :
OTE
the instructions on
T F
O CALIBRATE THE IERY USING THE
1. Start Calibrator.
For instructions on starting Calibrator, see
2. Choose X-Rite DTP41 as the measurement method.
3. In the Check Print Settings pane, choose the desired calibration set.
Choose the appropriate calibration set for the type of and media you will use
most often.
page A-5 for calibrating the DTP41 spectrophotometer.
DTP41
page 2-6.