Canon PowerShot A520 Quick Start Manual page 126

I
List of Messages
RAW Iyou attempted to play back a RAW image.
'You attempted to rotate an image recorded in a different camera or data type, an image
ledited with a computer,
or
a movie.
limage edited with a computer, or a movie.
You attempted to play back an image that was recorded in a special data type
!(proprietary data type used by the camera of another manufacturer, etc.) or a movie
recorded by another camera.
I
you attempted to magnify an image recorded in a different camera or data type, an
Cannot rotate
Unidentified Image
Cannot magnify
!
I
more
.
Too many marks
Unselectable image
Cannot register this
IYO~
attempted to register an image recorded in a different camera or a movie as a start-
image' up image.
-P-r-o--'-te-c-t-e-d-'-----you attempted to erase a protected image or movie.
!Too many images have been marked for printing or transferring. Cannot process any
Cannot complete!
ICould not save the print or transfer settings.
Exx
Camera malfunctioned. Turn off the power and turn on again, then re-shoot or play
Iback. If the same message recurs frequently, the camera may be damaged. Note the
error number [xx] and take the camera to a Customer Support Help Desk. If this
Imessage appears immediately after you have taken a shot, the camera may not have
shot the image Switch to the Playback mode and check whether the image was
lactually recorded.
122