How To Use Your Camera - AgfaPhoto Realishot VLG-4K User Manual

EN

HOW TO USE YOUR CAMERA

1. To open the Battery Door
Unlock the battery door by sliding the battery
door notch away from the opening. Use a
fingernail or other pointy object when sliding the
latch to get a better grip.
2. Installing the Battery
Insert the lithium-ion battery into the battery
compartment with the metal contacts facing the
inside of the camera. The battery can only be
inserted one way.
3. Installing the microSD card
Insert a microSD card to record and store your
videos and photos. When the battery is low,
media stored on the microSD card will not be
erased. Please insert a microSD card by following
the steps below:
1) Open the battery door.
2) Insert a microSD card. Ensure that the metal
contacts are inserted first. Push the microSD
card down until you hear an audible click.
The microSD card can only be inserted in one
way. Do not force the card in if it will not go in
smoothly.
3) Close the battery door by pushing it down and
sliding the lock back into place. To remove the
microSD card, simply push in and the card will
pop up.
Note :
• Please format the microSD card before using
the camera (Caution, this will erase all data on
the card).
• Do not remove or insert the microSD card when
recording. It may damage the card or cause
data loss.
• MicroSD card rating must be Class 10 or above.
4
After closing the battery door, make sure that
the door is closed securely and the lock is
engaged.
4. Charging the Battery
Connect your camera with an AC adaptor and the
USB cable. Insert the small end of the USB plug
into the camera port under the battery door, and
the larger end into the AC adaptor. While charging
the LED indicator light will light up solid red, when
finished charging the light will turn off.
5. Powering the Camera On/Off
Connect your camera with an AC adaptor and the
USB cable. Insert the small end of the USB plug
into the camera port under the battery door, and
the larger end into the AC adaptor. While charging
the LED indicator light will light up solid red, when
finished charging the light will turn off.
1) Press and hold the Power button for 3 seconds
to power the camera on. To power the camera
off, press the Power button again.
2) If the camera's battery is low, a "Low Power"
message will display on the screen and it will
automatically shut down within a few seconds to
prevent memory corruption or loss.
6. Formatting the Camera
1) Power on the camera, in Photo or Video mode,
press the MENU Button to the main menu. Press
the Up or down Button to switch to the System
Settings menu. Press the Right Button, then
press the Down Button to find format sub menu.
2) Press the Down Button to "Format", press Mode/
OK Button to enter, and choose "OK". Press the
Left or Right Button to choose "Yes (or No)", and
press Mode/OK Button to confirm formatting.
Note: Formatting will delete all files stored on the
microSD card. If you do not want to delete them,
please either download them to your computer or
use a fresh card.