Advertisement
STEREO RETURN 2 LEVEL (9)
Adjusts the level of the Stereo Return 2 that is added into the Lefi-Right mix
TAPE INPUT LEVEL (10)
Adjusts the stereo level of the Tape signal added to the Left-Right mix.
LED METER ARRAYS (11)
'Two 12 point LED arrays are provided to visually indicate the levels of the Left and Right mixes. The clip LED lights
when the levels reach +12 4ВУ, 6 ВУ below the actual clip level as a warning of loss of headroom,
MASTER (12)
This adjusts the master level for the Left and Right mix, and sets the overall output levels of the Left and Right output
jacks.
HEADPHONE LEVEL (13)
Adjusts the level of the Left and Right signals to the headphone jack. This signal is independent of the Master Level
Control. (pre-fader)
LINE INPUT (14)
High impedance channel input designed for unbalanced high level signals equipped with a 1/4" phone plug.
LOW Z MIC INPUT (15)
Channel input designed for use with а balanced low impedance mie or low level source equipped with an XLR connec-
tor.
PATCH (16)
А stereo jack that breaks the signal before EQ to allow for an external compressor or graphic EQ to be inserted into the
channel. Tip = Send, Ring = Return.
STEREO LINE INPUT, RIGHT (Channels 8, 10, 12, 14) (18)
A high impedance input for devices having a high level output and 1/4" phone plugs. When a stereo device is con-
nected, the Right output from the device should be connected to this jack. (See Left/Mono Return.)
RETURN 1, LEFT/MONO (19)
RETURN 1, RIGHT (20)
When a stereo effect device is connected to the Aux | output, the Right output from the device should be returned to
this jack. (See Left/Mono Return.)
RETURN 2, LEFT/MONO (21)
Advertisement
