Advertisement
Sle
es
..
| ®
GAIN (1)
Varies the gain of the channel input stage to allow a wide input dynamic range. Proper adjustment of the input gain will
maximize the signal to noise ratio,
HIGH EQ (2)
A shelving type of active tone control that varies the high (treble) frequency range +15 dB.
LOW EQ (3)
A shelving type of active tone control that varies the low (bass) frequency range +15 dB
AUX 1 (4)
Adjusts the level of the channel signal added into the Aux 1 mix. This control is post fader,
AUX 2 (5)
Adjusts the level of the channel signal added into the Aux 2 mix. This control is post fader.
PAN (6)
Assigns the channel to any position in the Left-Right stereo field. For mono operation, the channel should be assigned
to the Left or Right mix. On channels 7 - 14, this control functions as a balance control for the paired channels if a
stereo signal is applied to ће Left and Right input jacks. Tt is a pan control for mono inputs
CHANNEL LEVEL (7)
Sets the level of the channel to the Left and Right mixes. The detent (channels 1 - 6) is at the 0 dB (unity gain; mid
position) point to assure an optimum balance between noise and headroom.
STEREO RETURN 1 LEVEL (8)
Adjusts the level of the Stereo Return 1 that is added into the Left-Right mix.
Advertisement
