Configuring Settings With Gx Works3 - Mitsubishi Electric MELSEC iQ-F Series Quick Start Manual

4.3

Configuring Settings with GX Works3

1.
Select the "Navigation" window  [Parameter]  [Module Information]  [FX5-ENET]  [Application Settings]  [MQTT
Communication Setting]  [MQTT Connection Setting] and double-click <Detailed Setting>.
2.
Configure the following settings and click the [Apply] button.
Item
MQTT Server Specification Method
MQTT Server Host Name
MQTT Server Port No.
Client ID
Verify Server Certificate
3.
Configuring the settings with GX Works3 is completed by creating a program and writing it to the programmable
controller.
Page 41 CHECKING OPERATIONS
Page 19 Writing data to the programmable controller
Setting
Host name
********.amazonaws.com (own endpoint)
Enter the endpoint that was copied in the section below.
Page 36 Checking an endpoint
8883
test_things
Enter the name of the thing that was created in the section below.
Page 29 Creating AWS IoT things
Verify
4 CONFIGURING SERVER (MQTT BROKER) CONNECTION
4.3 Configuring Settings with GX Works3
4
40