Sharp SF-2022 Operation Manual page 37

COPIER TROUBLE?
Symptoms Remedy
© Is the READY indicator off? Copier is still warming up. Wait a
few minutes.
Copy paper is needed.
indicator on? See page 8, LOADING COPY
PAPER.
Power is on but copying is not @ Is the indicator Toner is required. See page 10,
possible. blinking? ADDING TONER.
Misfeed has occurred.
See page 26, MISFEED
REMOVAL.
® Is the indicator
blinkin
-o Please contact your authorised Sharp Service Centre immediately
TR if a problem persists after checking the above.
Wu3N
2
7
°
z
5
i
fe]
2
co)
An automatic self-diagnostic function is built into the SF-2022. 3
Should the Copier malfunction, the self-diagnostic function will g
locate the problem and stop the Copier to prevent damage. An 8
alphanumeric code will flash on the copy quantity display. es
~
ary) Example 1
fn (CH) will light when any cover is open. Check these areas to
=. ensure that they are all closed.
(CH) will blink if the developer unit has not been installed. Install a
unit.
!
: > oe Example 2
Lh | Should the Copier completely stop and this code appear, contact
your authorised Sharp Service Centre immediately.
35—