Sharp SF-2022 Operation Manual page 2

In some areas, the ''POWER™ switch positions are marked ''I'' and "' (') "' on the copier instead of 'ON'
and "'OFF''.
The symbol "'(!) "* denotes the copier is not completely de-energized but in a stand-by condition at this
"*POWER" switch position.
If your copier is so marked, please read 'I' for "ON" and " ()' for 'OFF'.
CAUTION:
For a complete electrical disconnection, pull out the main plug.
Pay
3 3 § 4 : ¢ 4 t : : | ¢ H H é $ i i
: 5
This apparatus complies with the requirements of EN 55014, 02.1987 and BS
800: 1988.
Dieses Gerat stimmt mit den Bedingungen der EN 55014, 02.1987 Uberein.
Cet appareil répond aux spécifications de la EN 55014, 02.1987.
Dit apparaat voldoet aan de vereiste EN 55014, 02.1987.
Apparatet opfylder kravene i EN 55014, 02.1987.
Questo apparecchio é stato prodotto in conformita alle EN 55014, 02.1987.
AUT? 1) CucKEUr] THPEl Tic TPOdiaypadéc THC EN 55014, 02.1987.
Este aparelho responde as especificagdes da EN 55014, 02.1987.
Este aparato cumple las especificaciones de la EN 55014, 02.1987.
i
Caution!
The socket-outlet shall be installed near the equipment and shall be easily
accessible.