Connector Types; Making Connections - Sony KP-43T75 Operating Instructions Manual

Installing and Connecting the Projection TV (continued)
Connector Types
You may find it necessary to use some of the
following connector types during set up.
CONTROL S cable
Sony cable for CONTROL S connection. This
feature is exclusive to Sony products and
allow greater control of all Sony equipment.
Making Connections
Connecting directly to a cable or
an antenna
Coaxial cable
Standard TV cable and antenna cable
Plug Type
_ (_ Push into connection.
Screw-on Type
_(_ -'_ _ Screw into connection.
S Video cable
High quality video cable for enhanced
picture quality
_ _) Align guides and
push into connection.
AudioNideo cable
--:_ _ _) Push into connection.
Video - Yellow
Audio (Left) - White
Audio (Right) - Red
Some DVD Players and DTV Receivers are
equipped with the following three video
connectors.
Y - Green
PB (CB, Cb or B-Y) - Blue
8 PR (CR, Cr or R-Y) - Red
---====:¢zZEB_ --_ _ Push into connection.
About the CONTROL S OUT jack
To control other Sony equipment with the
projection TV's remote control, connect the
CONTROL S IN jack of the equipment to the
CONTROL S OUT jack on the projection TV
with the CONTROL S cable.
(Rear of projection TV)
T_
_aVF_1E_
@1
VHr_F I
®1
The connection you choose will depend on
the cable found in your home. Newer homes
will be equipped with standard coaxial cable
(see A); older homes will probably have 300-
ohm twin lead cable (see B); still other
homes may contain both (see C ).
Use 75-ohm coaxial cable for improved
picture quality (see A).
A
B
• VHF only
or
• VHF/UHF
or
• Cable
• VHF only
or.
• UHF only
or
• VHF/UHF
(Rear of
75-ohm projection TV)
coaxial cable VHF/UHF
(Rear of
300-ohm twin projection TV)
lead cable VHF/UHF