Table of Contents
Advertisement
Light Sensor
Keypad
SR-24LE Keypad
Key
Function
Power Key/Right Arrow Key
Frequency Key/Left Arrow Key
Menu Key
Up Arrow Key
Down Arrow Key
Volume Key
Select Key
10 – English – SR-24LE/SR-20
LCD Screen
Operating Instructions
DANGER
Exposing the utility prior to digging is
the only way to verify its existence, lo-
cation, and depth. If excavating a utility,
periodically recheck the measured depth
and position to avoid damaging the util-
ity and to identify additional utility sig-
nals that may have been overlooked.
Powering the System
Use batteries that are all
NOTICE
the same type. Mixing al-
kaline and rechargeable
batteries can cause over
heating and battery leak-
age.
The SR-24LE is powered by four C-cell bat-
teries or a compatible 18 V Li-Ion battery
when using the SeekTech battery adapter�
Attach the adapter into the Battery Com-
partment and slide the battery into the bat-
tery shoe�
Receiver Operation Modes
The SR-24LE can operate using two modes:
Line Trace Mode and Sonde Mode�
Line Trace Mode
In Line Trace Mode you can Active Line
Trace by intentionally applying a signal onto
the target line through metal-to-metal con-
duction or non metal-to-metal induction with
a transmitter�
Also in Line Trace Mode, you can Passive
Line Trace by detecting signal energy cou-
pled onto metallic conductors from nearby
energy sources such as power lines� Pas-
sive Line Trace Mode includes Passive
Power, Radio Broadband, and OmniSeek
Broadband Modes� Broadband frequencies
target any signal in a range of frequencies�
Note: Active signals within a broadband
range are also detected.
Advertisement
Table of Contents
