Table of Contents
Advertisement
Third track
3.
Group the right and left side tracks, and set the volume at the same level for simultaneous adjustment. Increasing the
volume of the grouped tracks increases the stereo width, while decreasing their volume narrows the width.
Advanced tip: Using compression with a fast attack setting on the grouped tracks keeps transients (the first part of a sound, such as when a drum stick strikes
a cymbal) toward the center of the stereo image and allows them to expand within the stereo field as the sound decays.
Monitor Mix Blend
Tap the Monitor Mix button to view monitoring controls.
Use the monitor mix slider to determine how much of each input you hear. For best results, start monitoring at the midpoint and
adjust.
•
Move the slider towards the microphone icon (MIC) to hear more of the currently recorded audio.
•
Move the slider towards the device icon (PLAYBACK) to hear more of the previously recorded audio.
Advanced Mic Settings
After selecting the preset mode, fine-tune your sound with limiter, compressor, and equalizer settings. These settings are re-
tained in the microphone when using other audio and video recording applications.
Copy the side/bidirectional signal from the second track. Pan this track all the way
to the right and reverse the phase.
Manual Decoding of Raw Mid-Side Audio
Shure Incorporated
15/33
Advertisement
Table of Contents
