Table of Contents
Advertisement
SPECIFICATIONS
AMPLIFIER SECTION
Power Output
U.S. & Canadian models:
Stereo mode
Front L/R channels:
Surround mode
Front L/R and Center channels:
Surround L/R channels:
(Rear only driven)
Other area models:
Stereo mode]
Front L/R channels:
'Surround mode
Front L/R and Center channels:
Surround L/R channels:
(Rear only driven)
IM Distortion:
Damping Factor:
Input Sensitivity and Impedance
Phono:
CD/Tape Play:
Output Level and Impedance
Tape Ree:
Pre out:
Phono Overload
Frequency Response:
RIAA Deviation:
'Tone Control
Bass
Treble:
Signal-to-Noise Ratio
Phono:
CD/Tape:
Muting:
VIDEO SECTION
Television format
US. & Canadian models:
Other models:
Input Sensitivity and Impedance
Video (Composite):
S-Video (Y signal):
S-Video (C signal):
Output Level and Impedance
Video (Composite):
S-Video (Y signal):
S-Video (C signal):
DIGITAL SECTION
Digital Input Sampling Frequency:
Input Sensitivity Impedance
Coaxial:
AC-3 RE:
90 watts per channel, min. RMS
at
8 ohms, both channels driven from 20
Hz to 20 kHz with no more than 0.08%
total harmonic distortion.
80 watts per channel, min. RMS at
Sohms, three channels driven from
20Hz to 20kHz with no more than
0.08% total harmonic distortion.
40 watts per channel, min, RMS at
8ohms, both channels driven from
20Hz to 20kHz with no more than
0.08% total harmonic distortion.
2X 110 watts at 6 ohms, 1 kHz (DIN)
3X 95 watts at 6 ohms, | kHz (DIN)
2X 50 watts at 6 ohms, | kHz (DIN)
0.08% at rated power (Front)
60 at 8 ohms (Front)
2.5 mV/S0 kohms
150 mV/S0 kohms
150 mV/2.2 kohms
1/470 ohms
120 mV RMS at | kHz, 0.5% T.H.D.
20 Hz to 30 kHz, +0.5 dB
20 Hz to 20 kHz, +0.8 dB
+10 dB at 50 Hz
+10 dB at 10 kHz
80 dB (IHF A, 5 mV input)
100 dB (IHF A)
~co dB
NTSC
NTSC/PAL,
1 Vp-p/75 ohms.
1 Vp-p/75 ohms
0.28 Vp-p/75 ohms
1 Vp-p/75 ohms
1 Vp-p/75 ohms
0.28 Vp-p/75 ohms
32 kHz, 44.1 kHz, 48 kHz
0.5 Vpp/75 ohms
0.4 Vpp/75 ohms (other than US. &
Canadian model)
TUNER SECTION
FM
Tuning Range:
Usable Sensitivity
Mono:
Stereo:
50 dB Quieting Sensitivity
Mono:
Stereo:
Capture Ratio:
Image Rejection Ratio
U.S. & Canadian models:
Other area models:
IF Rejection Ratio:
Signal-to-Noise Ratio
Mono:
Stereo:
Alternate Channel Attenuation:
Selectivity:
AM Suppression Ratio:
Total Harmonic Distortion
Mono:
Stereo:
Frequency Response:
Stereo Separation:
Mating level:
AM
Tuning Range
USS. & Canadian models:
European & Australian
models:
Worldwide models:
Usable Sensitivity:
Image Rejection Ratio:
IF Rejection Ratio:
Signal-to-Noise Ratio:
Total Harmonic Distortion:
GENERAL
Power Supply
U.S. & Canadian models:
European & Australian
models:
Worldwide models:
Power Consumption
US. & Canadian models:
Other area models:
Dimensions (W x H x D):
Weight
REMOTE CONTROL
U.S & Canadian models:
Other area models:
Transmitter:
Signal range:
Power supply:
87.5 — 108.0 MHz (50 kHz steps)
11.2 dBF, 1.0 wv (75 ohms)
17.2 dBf, 2.0 uV (75 ohms)
17.2 dBE, 2.0 pV (75 ohms)
37.2 dBf, 20 wV (75 ohms),
1.5 4B
40 dB
85 dB
90 dB
76 dB
70 dB
55 dB
50 dB (DIN)
50 dB
0.1%
0.2%
30 Hz — 15 kHz,
45 dB at 1 kHz
30 dB at 100 Hz — 10 kHz
17.2 dBf
1.0 dB
530—1,710 kHz (10 kHz steps)
522—1,611 kHz (9 kHz steps)
531—1,602 kHz (9 kHz steps),
530
1,710 kHz (10 kHz steps)
30 nV
40 dB
40 dB
40 dB
0.7%
AC 120 V, 60 Hz
AC 230 V, 50 Hz
AC 220-230 V and 120 V switchabie,
50/60 Hz
4.2A
400 W
435 x 175 x 390 mm
17-1/8" X 6-7/8" X 15-3/8"
13 kg, 28.7 Ibs.
RC-PIOIS
RC-P201S
Infrared
Approx. 5 meters, 16 ft.
Two "AA" batteries (1.5 V x2)
Specifications and features are subject to change without notice.
Advertisement
Table of Contents
