Controls And Connections; Eceiver; Camera - X10 VK69A Owner's Manual

C
ONTROLS AND
R

ECEIVER

Video Out Jack
2.4 GHz
Channel Switch
ON-OFF Switch
4 4 4 4 4
C
ONNECTIONS
2.4 GHz Video
Antenna
Power Supply
Jack
C
AMERA
Point the raised dimple
on the antenna towards
the Receiver's location.
Remove clear cap and turn
lens counterclockwise to
focus (replace cap for
outdoor use).
Outdoors
Indoors
Plug power
supply in here.
Set codes
wheels.
5 5 5 5 5
Point backwards from
direction shown here if
you install the camera
outdoors.
Attach
to a wall.
Set channel switch
(under rubber plug)
to match setting on
VR31A or VR36A
Receiver. (A is at
bottom, D is at top).
It is factory set to A.
Cable adapter.
Plug into any
AC outlet
Important: Unplug power
supply before unplugging
power jack.