Sony SB-V500 Service Manual page 4

for audio signal
for composite video signal
for S video signal
R-AUDIOL VIDEO S$ VIDEO
s{=yiole-mOrelalarzeltiela
Precautions
+ Plug in the AC power cord of each piece of equipment to the wall outlet after connecting all the equipment.
+ Connect the connecting cord so that the color of each plug corresponds to that of the jacks on the SB-V500 and on
the other equipment.
Connecting Cords Use o
f the following optional connect: recommend
Audio input/output (mono « » stereo)
emt
Phono plug Phono plug (x2)
RK-C71
Video and audio input/output (stereo)
BNC (or video BNC (or video
phono) plug phono) plug
Me ac
Cm
bc:
Phono plug (x2) Phono plug (x2)
VMC-810SP (1m)
VMG-820SP (2m)
Video and audio input/output
(stereo < » mono)
BNC (or video BNC (or video
phono) plug phono) plug
Mom =
= ar
Phono plug (x2) Phono plug
VMC-910MSP (1m)
VMC-920MSP (2m)
Video and audio input/output
21-pin connector 21-pin connector
VMC-2121CE (1.5m)
Video and audio input/output (stereo)
BNC (or video phono)
plug (x2)
21-pin
Mm connector
Phono plug (x4)
| VMC-2106S (1.5m)
Video and audio input/output
(mono « » stereo)
BNC (or video phono)
plug (x2)
MD =
pets
21-pin
connector
Phono plug (x2)
VMC-2104MS (1.5m)
Connection
Oxo] alar-vetlare mr: Muledali cola
When using a TV, you will need one with a 21-pin connector.
There is a pair of audio output jacks; use it to connect audio equipment; for example, you can record the sound using a
cassette deck, or play back sound with your HiFi system.
to the
21-pin
connector
VIDEO/S VIDEO selector
Set to S VIDEO if the monitor
accepts S video signal.
Set to VIDEO if not.
to MONITOR
OUT AUDIO
Amplifier
to audio input
gam. Signal flow
Speaker system
Auto switch function to the S video signat
This unit has an automatic Y/C separate circuit. This circuit is automatically activated or deactivated by whether or not the S
video signal is included in the input signal.
Automatic Y/C separate circuit | AUTO Y/C SEPARATE indicator
Input signal Signat output from S VIDEO
Signal input from the S video Deactivated Does not fight.
input jack
Composite Y/C separated signal out of Activated Lights up.
video composite video signal
Ifa monitor that accepts S video signal is connected to the unit, any picture played back in S video signal can be
watched.
Notes on the remote commander and remote control
operation
« Keep the remote commander away from extremely hot or humid
» To avoid a malfunction, do not simultaneously depress two or
places.
more buttons.
+ Avoid dropping any foreign objects into the commander casing,
+ Avoid exposure of the remote sensor to direct sunlight or lighting
particularly when replacing the batteries.
apparatus. Such exposure can cause a malfunction.
7
OFelararsxertiela
Connecting Video Equipment
to video/audio
inputs
aah Signal flow
to S video input*
to S video output"
toIN1-4 h
to OUT 1-4 to OUT 1 - 4S VIDEO"
—.
=a
"Only when the connected equipment has the S video input/output jacks.
)
Using the IN/OUT Jacks on the Front Panel
FRONT/REAR selector
The front IN 4 and the rear IN 4 jacks
are changed in turn at each press.
Video equipment INTHE AR
S
Lights when the front IN 4 jacks are selected.
to OUT 4 (rear)
to video/audio
outputs
wae Signal flow
selecting Output Mode of OUT 4 Jacks
You can select either output mode A or B for the OUT 4 jacks. Use the OUTPUT MODE selector on the front panel.
In mode A
No signal is output from the OUT 4 jacks when IN 4 is selected by the INPUT SELECT switch. Normally use the unit in
mode A, but if a video player (for playback only) is connected to the IN 4 jacks, the OUT 4 jacks will be left unused.
in mode B
The signal input via the IN 4 jacks will be output from the OUT 4 jacks, as well as from the OUT 1, 2 and 3 jacks. When a
VTR for recording is connected to the OUT 4 jacks, you can perform dubbing onto 5 different VTRs at the same time. Or
you can connect a secondary monitor to the OUT 4 jacks.
Example of OGG A ij sche da al ek wk olin ss)
Recording the playback picture of the
VTR connected to IN 1, using the other
three VTRs connected to OUT 2, OUT 3
and OUT 4 (rear), as well as the video
camera recorder connected to OUT 4
(front).
Monitor
SB-V500
on the front panel: to mode A
Be MODE selector
Video camera
recorder
xample of mode Bo. wmilin acai ih Bit has ia. techn ni tine ka tach dhe jat on snes stellar om Sin
Recording the playback
picture of the VTR (for
playback only) connected to
IN 4, using five VTRs
connected to OUT 1, OUT 2,
OUT 3, OUT 4 (front) and
OUT 4 (rear).
+ VTR tor playback
only
+ Videodise player
+ TV tuner, etc.
MONITOR
OUT SB-V500 {
OUT 4
OUTPUT MODE selector
(tront)
on the front panel: to mode B
Using the SB-V500 as a signal distributor
Set the OUTPUT MODE selector to mode B, select the IN 4 with the INPUT SELECT switch, and use all the output jacks to
MONITOR
OUT
+ OUTPUT MODE selector : to mode B
+ INPUT SELECT switch: Select IN 4.
")
.
<
01
©
P=